General Finishes Gel Topcoat Oil-Based Urethane, Satin, Pint
General Finishes Gel Topcoat Oil-Based Urethane, Satin, Pint is intended for Interior only use.
Features
- Thick gel consistency
- Dries amber
- Satin sheen
- Oil and urethane
- Self-sealing
Best for
Interior raw wood; Interior stained wood; Interior sealed wood with adhesion test
Specs
| Color or finish | Clear, Satin; dries amber |
|---|---|
| Sheen | Satin |
| Selected size | Pint |
| Base | Oil and urethane |
| Use | Interior only |
| Coverage | 25-40 sq ft/half-pint; 50-75 sq ft/pint; 100-150 sq ft/quart; 400-600 sq ft/gallon |
| Touch dry | 8+ hours |
| Recoat | 24+ hours per specifications; instructions: 12-24+ hours over raw wood, up to 72+ hours over sealed surface |
| Full cure | 30 days |
| Application conditions | Dry times based on 70°F and 50% humidity |
| Coats | 3; additional coats do not improve durability |
| Apply with | Cotton cloth; Natural bristle or foam brush; Staining pad; Pad applicator |
| Cleanup | Mineral spirits or waterless hand cleaner for hands and tools |
| VOC | <550 g/L |
| Topcoat compatibility | Self-sealing; GF finishes compatible as a system; test other manufacturers finishes |
| Manufacturer part # | SP |
How to apply
Start with the manufacturer's preparation steps: Open-grain raw wood: sand 120, 150, then 180 grit; Closed-grain raw wood: sand 150 then 220 grit; Remove dust; Test adhesion on existing finish.
- Sand and remove dust
- Stir thoroughly
- Apply 3 thin coats
- Wipe excess with grain
- Sand between coats with 220-320 grit or 0000 steel wool; do not sand final coat
- Allow 30 days to cure
Good to know
Use limits: Exterior use; Spray application.
Danger: 2023 SDS: causes skin and eye irritation, may cause allergic skin reaction and cancer, and causes organ damage through prolonged or repeated exposure.
: Oil-soaked applicators may spontaneously catch fire if improperly discarded.
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
How much will I need?
Use these manufacturer coverage figures: 25-40 sq ft/half-pint; 50-75 sq ft/pint; 100-150 sq ft/quart; 400-600 sq ft/gallon. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 24+ hours per specifications; instructions: 12-24+ hours over raw wood, up to 72+ hours over sealed surface. Follow the application conditions and instructions for this product.