Skip to content
FREE SHIPPING ON ORDERS $35+ | Premium Paint & Supplies
Free Shipping $35+

General Finishes Seal-A-Cell Oil-Based Sealer, Clear, Quart

Original price $37.49 - Original price $37.49
Original price
$37.49
$37.49 - $37.49
Current price $37.49

General Finishes Seal-A-Cell Oil-Based Sealer, Clear, Quart is intended for interior use.

Features

  • Penetrating oil and urethane blend
  • Highlights wood figure
  • Can serve as pre-stain conditioner
  • Can be stand-alone finish with use limits
  • Ambers with age

Best for

Interior raw wood cabinets; Trim; Doors; Furniture

Specs

Color or finish Clear
Selected size Quart
Base oil; penetrating oil and urethane sealer with wax
Use interior
Touch dry 12+ hours
Recoat 24+ hours
Full cure 30 days
Application conditions TDS recommends 70°F and 50% relative humidity
Coats 1-2
Apply with Rag; Brush; Paint pad
Thinning Not recommended
Cleanup Mineral spirits for equipment; mineral spirits or waterless hand cleaner for hands
VOC <565 g/L
Topcoat compatibility Follow with 2-3 coats Arm-R-Seal for added protection; can condition wood before GF oil stains
Manufacturer part # SSQT

How to apply

Start with the manufacturer's preparation steps: Clean contaminants and dust; Sand raw wood progressively up to 220 grit; do not sand finer.

  1. Clean and sand raw wood up to 220 grit
  2. Apply with rag, brush or paint pad
  3. Wipe off excess with a clean cloth
  4. Apply Arm-R-Seal for higher protection if needed

Good to know

Use limits: Pre-finished wood per TDS; Non-wood substrates; High-use wet surfaces as a stand-alone finish.

Danger: Flammable liquid and vapor; aspiration hazard; may cause skin allergy and cancer; may damage central nervous system with prolonged or repeated exposure.

Warning: Oil-soaked rags may spontaneously combust; use a fireproof disposal container.

Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.

Questions

When can I apply another coat?

The listed manufacturer recoat guidance is 24+ hours. Follow the application conditions and instructions for this product.

Manufacturer directions and product information