General Finishes Arm-R-Seal Wipe-On Topcoat, Gloss, Quart
General Finishes Arm-R-Seal Wipe-On Topcoat, Gloss, Quart is intended for Interior only use.
Features
- Oil-based urethane
- Ambering finish
- Wipe-on application
- Satin, semi-gloss and gloss options
- Self-sealing
Best for
Interior raw wood; Stained wood; Dark painted wood; Sealed wood after adhesion test
Specs
| Color or finish | Clear, Gloss; dries amber |
|---|---|
| Sheen | Gloss |
| Selected size | Quart |
| Base | Oil-based urethane |
| Use | Interior only |
| Coverage | 50-60 sq ft/pint; 100-125 sq ft/quart; 400-500 sq ft/gallon |
| Touch dry | 12+ hours |
| Recoat | 24+ hours |
| Full cure | 30 days |
| Application conditions | Dry time based on 70°F and 50% humidity |
| Coats | 3; no more than 3 recommended |
| Apply with | Cloth wipe-on; Foam brush; Brush or roll |
| Thinning | Rarely needed; up to 10% mineral spirits if local regulations allow |
| Cleanup | Mineral spirits or waterless hand cleaner |
| VOC | Gloss <528 g/L |
| Topcoat compatibility | Self-sealing; GF finish system compatible; test other finishes |
| Manufacturer part # | AGQT |
How to apply
Start with the manufacturer's preparation steps: Raw wood: sand up to 150 grit and remove dust; Fresh stain: do not sand; Sealed surface: scuff with 50:50 denatured alcohol/water, dry 1-2 hours, sand 220-320 grit, remove dust.
- Prepare surface and stir often
- Test adhesion over sealed surface
- Wipe or brush on 3 thin coats
- Sand lightly between coats
- Allow 30 days to cure
Good to know
Use limits: White or light finishes due ambering; Exterior use; Spray application.
Danger: Gloss SDS: flammable liquid and vapor; aspiration hazard; may cause allergic skin reaction; suspected cancer and reproductive hazards; organ damage from prolonged or repeated exposure.
: Product page says Gloss has no California Prop 65 listed chemicals found.
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
How much will I need?
Use these manufacturer coverage figures: 50-60 sq ft/pint; 100-125 sq ft/quart; 400-500 sq ft/gallon. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 24+ hours. Follow the application conditions and instructions for this product.