General Finishes Arm-R-Seal Wipe-On Topcoat, Semi-Gloss, Pint
General Finishes Arm-R-Seal Wipe-On Topcoat, Semi-Gloss, Pint is intended for Interior only use.
Features
- Oil-based urethane
- Ambering finish
- Wipe-on application
- Satin, semi-gloss and gloss options
- Self-sealing
Best for
Interior raw wood; Stained wood; Dark painted wood; Sealed wood after adhesion test
Specs
| Color or finish | Clear, Semi-Gloss; dries amber |
|---|---|
| Sheen | Semi-Gloss |
| Selected size | Pint |
| Base | Oil-based urethane |
| Use | Interior only |
| Coverage | 50-60 sq ft/pint; 100-125 sq ft/quart; 400-500 sq ft/gallon |
| Touch dry | 12+ hours |
| Recoat | 24+ hours |
| Full cure | 30 days |
| Application conditions | Dry time based on 70°F and 50% humidity |
| Coats | 3; no more than 3 recommended |
| Apply with | Cloth wipe-on; Foam brush; Brush or roll |
| Thinning | Rarely needed; up to 10% mineral spirits if local regulations allow |
| Cleanup | Mineral spirits or waterless hand cleaner |
| VOC | Semi-Gloss <575 g/L |
| Topcoat compatibility | Self-sealing; GF finish system compatible; test other finishes |
| Manufacturer part # | SGPT |
How to apply
Start with the manufacturer's preparation steps: Raw wood: sand up to 150 grit and remove dust; Fresh stain: do not sand; Sealed surface: scuff with 50:50 denatured alcohol/water, dry 1-2 hours, sand 220-320 grit, remove dust.
- Prepare surface and stir often
- Test adhesion over sealed surface
- Wipe or brush on 3 thin coats
- Sand lightly between coats
- Allow 30 days to cure
Good to know
Use limits: White or light finishes due ambering; Exterior use; Spray application.
Danger: Semi-Gloss SDS: flammable liquid and vapor; aspiration hazard; may cause allergic skin reaction; suspected cancer and reproductive hazards; organ damage from prolonged or repeated exposure; harmful to aquatic life.
: Product page California Prop 65 warning lists benzene, crystalline silica and toluene for Satin and Semi-Gloss.
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
How much will I need?
Use these manufacturer coverage figures: 50-60 sq ft/pint; 100-125 sq ft/quart; 400-500 sq ft/gallon. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 24+ hours. Follow the application conditions and instructions for this product.