Flood CWF-UV Penetrating Wood Finish, Cedar, Matte, Gallon
Flood CWF-UV Penetrating Wood Finish, Cedar, Matte, Gallon is intended for exterior use.
Features
- Water repellent
- Mildew-resistant coating
- UV protection
Best for
Exterior wood decks; Fences; Siding; Railings; Outdoor furniture; Trim
Specs
| Color or finish | Cedar |
|---|---|
| Sheen | Matte |
| Selected size | Gallon |
| Base | acrylic-oil, water cleanup |
| Use | exterior |
| Coverage | 150-250 sq ft/gallon |
| Touch dry | 4 hours |
| Recoat | Wet-on-wet before first coat dries |
| Full cure | 30 days before washing |
| Application conditions | 50-90°F material, air and substrate |
| Apply with | Synthetic brush; Roller; Airless spray |
| Thinning | Do not thin |
| Cleanup | Warm soapy water |
| VOC | <275 |
| Manufacturer part # | FLD520 |
How to apply
Start with the manufacturer's preparation steps: Clean and dry wood; Remove previous coatings other than weathered CWF-UV.
Good to know
Use limits: Interior use; Over other previous coatings without removal.
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
How much will I need?
Use these manufacturer coverage figures: 150-250 sq ft/gallon. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is Wet-on-wet before first coat dries. Follow the application conditions and instructions for this product.