Watco Lacquer Clear Wood Finish Spray, Gloss, 11.25 oz
Watco Lacquer Clear Wood Finish Spray, Gloss, 11.25 oz is intended for interior use.
Features
- Clear gloss lacquer
- Fills pores in most woods
Best for
Interior wood; Furniture; Doors; Cabinets; Paneling
Specs
| Color or finish | Gloss Clear |
|---|---|
| Sheen | Gloss |
| Selected size | 11.25 oz |
| Base | nitrocellulose modified alkyd aerosol |
| Use | interior |
| Coverage | 40 sq ft/can |
| Touch dry | 30 minutes |
| Recoat | 2 hours |
| Full cure | Normal use after 7 days |
| Application conditions | 55-90°F; relative humidity below 85% |
| Coats | At least 3 |
| Apply with | Aerosol spray |
| Cleanup | Clear spray tip by inverting can; wet spray cleanup not stated |
| Topcoat compatibility | Over thoroughly dry stain or paint after compatibility test |
| Manufacturer part # | 63081 |
How to apply
Start with the manufacturer's preparation steps: Clean, dry and remove wax and contaminants; Sand 150-220 grit; Remove dust.
Good to know
Use limits: Floors; Exterior surfaces.
Danger: Extremely flammable aerosol; serious eye irritant; harmful if inhaled; may cause drowsiness, genetic defects and cancer.
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
How much will I need?
Use these manufacturer coverage figures: 40 sq ft/can. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 2 hours. Follow the application conditions and instructions for this product.