Watco Lacquer Clear Wood Finish, Semi-Gloss, Quart
Watco Lacquer Clear Wood Finish, Semi-Gloss, Quart is intended for interior use.
Features
- Clear gloss lacquer
- Fills pores in most woods
Best for
Interior wood; Furniture; Doors; Cabinets; Paneling
Specs
| Color or finish | Semi-Gloss Clear |
|---|---|
| Sheen | Semi-Gloss |
| Selected size | Quart |
| Base | nitrocellulose modified alkyd and rosin |
| Use | interior |
| Coverage | 190-290 sq ft/gallon |
| Touch dry | 1 hour |
| Recoat | 2 hours in application directions; 12 hours in physical properties |
| Full cure | Normal use after 7 days |
| Application conditions | 55-90°F; relative humidity below 85% |
| Coats | At least 3 |
| Apply with | Natural bristle brush; Applicator |
| Cleanup | Lacquer thinner |
| VOC | 651-659 |
| Topcoat compatibility | Over thoroughly dry stain or paint after compatibility test |
| Manufacturer part # | 63141 |
How to apply
Start with the manufacturer's preparation steps: Clean, dry and remove wax and contaminants; Sand 150-220 grit; Remove dust.
Good to know
Use limits: Floors; Exterior surfaces.
Danger: Extremely flammable liquid and vapor; serious eye damage; harmful if inhaled; may cause genetic defects and cancer.
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
How much will I need?
Use these manufacturer coverage figures: 190-290 sq ft/gallon. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 2 hours in application directions; 12 hours in physical properties. Follow the application conditions and instructions for this product.