Rust-Oleum Specialty Metallic Spray Paint in Copper gives picture frames, candleholders, holiday decor and other accent pieces a rich, brilliant copper finish. It is a leafing metallic, so the metal flakes rise to the surface for a bright, reflective look. Rust-Oleum rates it for wood, metal and more, on interior surfaces only.
Highlights
- Bright leafing metallic copper finish for decor and accent pieces
- Interior surfaces only
- Touch dry in 1 hour, handle in 4 hours
- Do not clear coat: Rust-Oleum says a clear coat finish is not recommended
Specifications
| Color |
Metallic Copper |
| Size |
11 oz aerosol |
| Coverage |
About 10 to 12 sq ft per can |
| Dry time (70 F, 50% RH) |
Touch 1 hour; handle 4 hours; fully dry 24 hours |
| Recoat |
Within 1 hour or after 24 hours |
| Apply at |
50 to 90 F, humidity below 65% |
| Resin |
Solvent acrylic |
| Heat resistance |
200 F dry heat |
| Manufacturer part # |
1937830 (UPC 020066193782) |
How to apply
- Wash off dirt, grease and oil, rinse and let dry. Remove loose paint and rust with a wire brush or sandpaper and lightly sand glossy surfaces.
- Prime bare wood and metal; Rust-Oleum recommends one of its primers for best adhesion. See spray primers.
- Shake the can for one minute after the mixing ball starts to rattle, and shake often while spraying.
- Hold the can 12 to 14 inches away and apply two or more light coats a few minutes apart, keeping the can moving.
Good to know
Spray outdoors or in a well ventilated area such as an open garage, away from open flame. Clean up wet paint with xylol or mineral spirits. Read the Rust-Oleum SPC-106 Metallic Sprays technical data sheet (rev 10/05/23).
Shop related
Also in this line: Specialty Metallic Silver. Compare more metallic finishes in metallic spray paint.