Zinsser Watertite Mold & Mildew Proof Waterproofing, White, Gallon
Zinsser Watertite Mold & Mildew Proof Waterproofing, White, Gallon is intended for interior and exterior use.
Features
- Resists up to 34 PSI water pressure
- Mildewcide protects paint film only
- Smooth non-gritty finish
Best for
Concrete; Stucco; Cement; Cinder block; Masonry; Basement walls; Exterior foundations; Retaining walls
Specs
| Color or finish | White |
|---|---|
| Selected size | Gallon |
| Base | oil-based waterproofing paint with Portland cement |
| Use | interior and exterior |
| Coverage | 75 sq ft/gallon first coat; 100 sq ft/gallon second coat |
| Touch dry | 1 hour |
| Recoat | 4 hours |
| Full cure | 7-14 days |
| Application conditions | 50-90°F |
| Coats | 2 |
| Apply with | Brush; Roller |
| VOC | <400 |
| Manufacturer part # | 5001 |
How to apply
Start with the manufacturer's preparation steps: Remove mold and mildew; Remove unsound coating; Repair cracks and holes.
Good to know
Use limits: Foot traffic; Potable water tanks; Cisterns; Bird baths; Swimming pools.
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
How much will I need?
Use these manufacturer coverage figures: 75 sq ft/gallon first coat; 100 sq ft/gallon second coat. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 4 hours. Follow the application conditions and instructions for this product.