Zinsser Bondz Maximum Adhesion Primer, White, Quart
Zinsser Bondz Maximum Adhesion Primer, White, Quart is intended for interior and exterior use.
Features
- Bonds to difficult glossy surfaces
- Low odor
- Low VOC
Best for
PVC; Vinyl; Formica; Fiberglass; Tile; Glazed brick; Non-ferrous metal; Galvanized steel; Glossy enamel; Drywall; Masonry; Glass; Wood
Specs
| Color or finish | White |
|---|---|
| Selected size | Quart |
| Base | water-based acrylic primer |
| Use | interior and exterior |
| Coverage | Approximately 400 sq ft/gallon practical |
| Touch dry | 30 minutes |
| Recoat | 1 hour with conventional paint; 6 hours with epoxy |
| Application conditions | 36-90°F; surface at least 5°F above dew point; relative humidity ≤85% |
| Coats | 1, second coat if very porous |
| Apply with | Brush; Roller; Spray |
| Thinning | Do not thin |
| Cleanup | Soap and water |
| VOC | <100 |
| Topcoat compatibility | Oil-based enamels, water-based acrylics, epoxies, urethanes, lacquer |
| Manufacturer part # | 271198 |
How to apply
Start with the manufacturer's preparation steps: Clean, dry, sound surface; Remove contamination; Test adhesion.
Good to know
Use limits: Floors; Decks; Immersion or prolonged water contact; Below grade; Polyethylene; Polypropylene; Teflon; Nylon.
Questions
How much will I need?
Use these manufacturer coverage figures: Approximately 400 sq ft/gallon practical. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 1 hour with conventional paint; 6 hours with epoxy. Follow the application conditions and instructions for this product.