ZAR Exterior Water-Based Poly HP, Clear Satin, Gallon
ZAR Exterior Water-Based Poly HP, Clear Satin, Gallon is intended for exterior use.
Features
- Clear protective finish
- Non-yellowing
- UV protection
Best for
Exterior wood; Wood doors; Fiberglass doors; Wood-grained steel doors; Patio furniture; Above-waterline marine woodwork
Specs
| Color or finish | Clear Satin |
|---|---|
| Sheen | Satin |
| Selected size | Gallon |
| Base | water-based polyurethane |
| Use | exterior |
| Coverage | 500-600 sq ft/gallon at 1 mil |
| Touch dry | 30 minutes |
| Recoat | 2 hours |
| Application conditions | 60-90°F air and surface; relative humidity below 50% |
| Coats | 3 exterior wooden surfaces |
| Apply with | Synthetic bristle brush; Foam brush; Sprayer |
| Thinning | Not required |
| Cleanup | Soap and water |
| Manufacturer part # | 32713 |
How to apply
Start with the manufacturer's preparation steps: Remove dirt, wax and loose finish; Sand sound old finish lightly; Remove poor finish, lacquer or shellac fully.
Good to know
Use limits: Roller application; Paint; Decks or other foot traffic areas.
Danger: Causes skin and serious eye irritation; may damage fertility or the unborn child.
Questions
How much will I need?
Use these manufacturer coverage figures: 500-600 sq ft/gallon at 1 mil. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 2 hours. Follow the application conditions and instructions for this product.