Varathane Ultimate Water-Based Polyurethane, Satin, 11.25 oz
Varathane Ultimate Water-Based Polyurethane, Satin, 11.25 oz is intended for interior use.
Features
- Crystal clear satin
- Water based finish
- Aerosol application
Best for
Interior wood; Furniture; Doors; Cabinets; Trim
Specs
| Color or finish | Crystal Clear Satin |
|---|---|
| Sheen | Satin |
| Selected size | 11.25 oz |
| Base | water |
| Use | interior |
| Coverage | 20-25 sq ft per can |
| Touch dry | 30 minutes |
| Recoat | 1 hour |
| Full cure | Normal use after 3 days |
| Application conditions | 55-90°F; relative humidity below 85% |
| Coats | At least 4 aerosol coats |
| Apply with | Aerosol spray |
| Cleanup | Wet overspray: mineral spirits or paint thinner |
| Manufacturer part # | 200281 |
How to apply
Start with the manufacturer's preparation steps: Clean and dry surface; Remove wax, grease, oil, shellac, lacquer, mildew and polish; Sand poor old finish with 120-150 grit; Remove sanding dust.
- Shake can before and during use
- Spray light overlapping coats from 10-12 inches
- Wait one hour before recoating
- Sand lightly between coats with 220 grit
- Apply at least four coats
- Clear nozzle by inverting can after use
Good to know
Use limits: Linoleum; Vinyl; Glazed tile; Metal.
Danger: Extremely flammable aerosol; contains gas under pressure and may explode if heated.
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
How much will I need?
Use these manufacturer coverage figures: 20-25 sq ft per can. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 1 hour. Follow the application conditions and instructions for this product.