Varathane Ultimate Water-Based Polyurethane, Gloss, Quart
Varathane Ultimate Water-Based Polyurethane, Gloss, Quart is intended for interior use.
Features
- Clear finish
- Scratch and stain protection
- Low odor
- Water cleanup
Best for
Interior bare, stained or painted wood; Furniture; Doors; Window frames; Cabinets; Trim
Specs
| Color or finish | Crystal Clear Gloss |
|---|---|
| Sheen | Gloss |
| Selected size | Quart |
| Base | water |
| Use | interior |
| Recoat | At least 2 hours for brush-on |
| Full cure | Normal use after 3 days |
| Application conditions | 55-90°F and below 85% relative humidity |
| Coats | At least 3 brush-on coats |
| Apply with | Synthetic bristle brush; Foam brush; Applicator |
| Cleanup | Soap and water |
| Topcoat compatibility | Over thoroughly dry stained or painted wood |
| Manufacturer part # | 200041H |
How to apply
Start with the manufacturer's preparation steps: Surface clean, dry and free of wax, grease, oil, shellac, lacquer, mildew and polish; Remove poor old finish and sand with 120-150 grit; Remove sanding dust; Test over white or pastel paint or stain.
- Prepare clean dry wood
- Stir thoroughly without shaking
- Brush with synthetic or foam brush
- Wait at least 2 hours before recoating
- Apply at least 3 coats
- Wait 24 hours for light use and 3 days for normal use
Good to know
Use limits: Linoleum; Vinyl; Glazed tile; Metal.
None: Representative Gloss gallon SDS has no assigned signal word.
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
When can I apply another coat?
The listed manufacturer recoat guidance is At least 2 hours for brush-on. Follow the application conditions and instructions for this product.