Varathane Ultimate Water-Based Polyurethane, Gloss, 11.25 oz
Varathane Ultimate Water-Based Polyurethane, Gloss, 11.25 oz is intended for interior use.
Features
- Crystal clear gloss
- Water based finish
- Aerosol application
Best for
Interior wood; Furniture; Doors; Cabinets; Trim
Specs
| Color or finish | Crystal Clear Gloss |
|---|---|
| Sheen | Gloss |
| Selected size | 11.25 oz |
| Base | water |
| Use | interior |
| Touch dry | 30 minutes |
| Recoat | 1 hour |
| Full cure | Normal use after 3 days |
| Application conditions | 55-90°F; relative humidity below 85% |
| Coats | At least 4 aerosol coats |
| Apply with | Aerosol spray |
| Manufacturer part # | 200081 |
How to apply
Start with the manufacturer's preparation steps: Clean and dry surface; Remove wax, grease, oil, shellac, lacquer, mildew and polish; Sand poor old finish with 120-150 grit; Remove sanding dust.
- Shake can before and during use
- Spray light overlapping coats from 10-12 inches
- Wait one hour before recoating
- Sand lightly between coats with 220 grit
- Apply at least four coats
- Clear nozzle by inverting can after use
Good to know
Use limits: Linoleum; Vinyl; Glazed tile; Metal.
Danger: Extremely flammable aerosol; gas under pressure may explode if heated; California Proposition 65 cancer warning.
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
When can I apply another coat?
The listed manufacturer recoat guidance is 1 hour. Follow the application conditions and instructions for this product.