Varathane Premium Fast Dry Wood Stain, Spring Oak, Quart
Varathane Premium Fast Dry Wood Stain, Spring Oak, Quart is intended for interior use.
Features
- Urethane modified alkyd
- Nano pigments
- Stains in one coat
- Dry to touch in one hour
Best for
Interior furniture; Cabinets; Doors; Trim; Floors; Paneling
Specs
| Color or finish | Spring Oak |
|---|---|
| Selected size | Quart |
| Base | oil |
| Use | interior |
| Coverage | 225-275 sq ft/quart; 70 sq ft/half-pint |
| Touch dry | About 1 hour at 70°F and 50% RH |
| Recoat | 1 hour |
| Full cure | 24 hours |
| Application conditions | 60-90°F, relative humidity below 85% |
| Coats | One |
| Apply with | Brush; Lint-free rag |
| Thinning | Do not dilute |
| Cleanup | Mineral spirits |
| VOC | 500-550 |
| Topcoat compatibility | Topcoat with Varathane Polyurethane after at least one hour; darker colors may need longer |
| Manufacturer part # | 262004 |
How to apply
Start with the manufacturer's preparation steps: Remove existing finishes; Sand bare wood through 120, 150, 180 and 220 grit; Remove dust, grease and glue; Test color on hidden area.
- Prepare clean bare wood and test color
- Stir or shake product
- Apply one liberal coat
- Allow 2-3 minutes penetration
- Wipe off all excess in direction of grain
- Wait at least one hour before topcoat
Good to know
Use limits: Exterior wood, floors, decks or siding.
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
How much will I need?
Use these manufacturer coverage figures: 225-275 sq ft/quart; 70 sq ft/half-pint. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 1 hour. Follow the application conditions and instructions for this product.