Varathane Premium Fast Dry Wood Stain, Ipswich Pine, Quart
Varathane Premium Fast Dry Wood Stain, Ipswich Pine, Quart is intended for interior use.
Features
- Urethane modified alkyd
- Nano pigments
- Stains in one coat
- Dry to touch in one hour
Best for
Interior furniture; Cabinets; Doors; Trim; Floors; Paneling
Specs
| Color or finish | Ipswich Pine |
|---|---|
| Selected size | Quart |
| Base | oil |
| Use | interior |
| Coverage | 225-275 sq ft/quart; 70 sq ft/half-pint |
| Touch dry | About 1 hour at 70°F and 50% RH |
| Recoat | 1 hour |
| Full cure | 24 hours |
| Application conditions | 60-90°F, relative humidity below 85% |
| Coats | One |
| Apply with | Brush; Lint-free rag |
| Thinning | Do not dilute |
| Cleanup | Mineral spirits |
| VOC | 500-550 |
| Topcoat compatibility | Topcoat with Varathane Polyurethane after at least one hour; darker colors may need longer |
| Manufacturer part # | 262012 |
How to apply
Start with the manufacturer's preparation steps: Remove existing finishes; Sand bare wood through 120, 150, 180 and 220 grit; Remove dust, grease and glue; Test color on hidden area.
- Prepare clean bare wood and test color
- Stir or shake product
- Apply one liberal coat
- Allow 2-3 minutes penetration
- Wipe off all excess in direction of grain
- Wait at least one hour before topcoat
Good to know
Use limits: Exterior wood, floors, decks or siding.
Danger: Ipswich Pine half-pint SDS: flammable liquid; skin sensitization; may cause genetic defects, cancer, reproductive harm and organ damage through repeated exposure. Other colors may have different SDS classifications.
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
How much will I need?
Use these manufacturer coverage figures: 225-275 sq ft/quart; 70 sq ft/half-pint. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 1 hour. Follow the application conditions and instructions for this product.