Varathane Outdoor Water-Based Spar Urethane Spray, Clear Gloss, 1 oz
Varathane Outdoor Water-Based Spar Urethane Spray, Clear Gloss, 1 oz is intended for exterior use.
Features
- UV and weather protection
- Clear finish
Best for
Outdoor furniture; Doors; Windows; Fences; Railings; House trim; Boats above waterline
Specs
| Color or finish | Clear Gloss |
|---|---|
| Sheen | Gloss |
| Selected size | 1 oz |
| Base | water, urethane modified acrylic aerosol |
| Use | exterior |
| Coverage | 10-12 sq ft per aerosol can |
| Touch dry | 30 minutes |
| Recoat | 1 hour |
| Full cure | Normal use after 3 days |
| Application conditions | 55-90°F; relative humidity below 85% |
| Coats | At least 4 |
| Apply with | Aerosol spray |
| Cleanup | Mineral spirits or paint thinner for wet aerosol stain per TDS |
| Topcoat compatibility | Over thoroughly dry stain or paint; test inconspicuous area |
| Manufacturer part # | 250081 |
How to apply
Start with the manufacturer's preparation steps: Clean and dry surface; Remove wax, grease, oil, shellac, lacquer, mildew and polishes; Sand poor old finish with 120-150 grit; Remove sanding dust.
Good to know
Use limits: Decks; High traffic areas; Siding; Rough-sawn surfaces.
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
How much will I need?
Use these manufacturer coverage figures: 10-12 sq ft per aerosol can. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 1 hour. Follow the application conditions and instructions for this product.