Varathane Oil-Based Spar Urethane, Clear Semi-Gloss, Quart
Varathane Oil-Based Spar Urethane, Clear Semi-Gloss, Quart is intended for exterior use.
Features
- UV and weather protection
Best for
Outdoor railings; Fences; Patio furniture; House trim
Specs
| Color or finish | Clear Semi-Gloss |
|---|---|
| Sheen | Semi-Gloss |
| Selected size | Quart |
| Base | oil-modified urethane in mineral spirits |
| Use | exterior |
| Coverage | 380-760 sq ft/gallon; 95-190 sq ft/quart |
| Touch dry | 2 hours |
| Recoat | 8 hours |
| Full cure | Normal use after 3 days |
| Application conditions | 55-90°F; relative humidity below 85% |
| Coats | At least 2 |
| Apply with | Natural bristle brush; Applicator |
| Thinning | Do not thin |
| Cleanup | Mineral spirits |
| VOC | <350 |
| Topcoat compatibility | Over thoroughly dry stain or paint |
| Manufacturer part # | 9441 |
How to apply
Start with the manufacturer's preparation steps: Clean and dry; Remove wax, grease, oil, mildew and loose coating; Sand 150-220 grit; Remove sanding dust.
Good to know
Use limits: Decks; High traffic areas; Siding; Rough-sawn surfaces.
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
How much will I need?
Use these manufacturer coverage figures: 380-760 sq ft/gallon; 95-190 sq ft/quart. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 8 hours. Follow the application conditions and instructions for this product.