Seal-Krete Original Waterproofing Primer/Sealer, Clear, Gallon
Seal-Krete Original Waterproofing Primer/Sealer, Clear, Gallon is intended for interior/exterior use.
Features
- Clear satin sealer
- Milky white during application, dries clear
- Water repellent
- Can be used as primer
Best for
Above-grade vertical brick; Stucco; Concrete; Vinyl siding; Aluminum siding; Chalky surfaces; Horizontal surfaces as primer
Specs
| Color or finish | Clear |
|---|---|
| Selected size | Gallon |
| Base | water-based acrylic |
| Use | interior/exterior |
| Coverage | 80-300 sq ft per gallon, depending on porosity |
| Touch dry | 2-4 hours dry time |
| Recoat | 2 hours |
| Application conditions | Do not apply if temperature will fall below 50°F within 24 hours |
| Coats | At least 2 |
| Apply with | Brush; Roller; Garden sprayer; Airless sprayer |
| Thinning | Do not dilute |
| Cleanup | Soap and water |
| VOC | <49 |
| Topcoat compatibility | Latex, oil-based or elastomeric coating when dry |
| Manufacturer part # | 100001 |
How to apply
Start with the manufacturer's preparation steps: Clean and dry; Remove loose paint and excessive chalk; Repair cracks.
Good to know
Use limits: Below-grade use; Swimming pools; Bird baths; Water features; Cedar; Redwood; Hydrostatic pressure; Very porous decorative block.
Questions
How much will I need?
Use these manufacturer coverage figures: 80-300 sq ft per gallon, depending on porosity. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 2 hours. Follow the application conditions and instructions for this product.