Rust-Oleum Painter's Touch 2X Enamel, Gloss White, Half Pint
by Rust-Oleum
Original price
$8.33
-
Original price
$8.33
Original price
$8.33
$8.33
-
$8.33
Current price
$8.33
Rust-Oleum Painter's Touch 2X Enamel, Gloss White, Half Pint is intended for interior/exterior use.
Features
- Chip resistant
- Color retention
- Brush-on enamel
- Indoor and outdoor use
Best for
Wood; Metal; Plaster; Masonry; Unglazed ceramic
Specs
| Color or finish | Gloss White |
|---|---|
| Sheen | Gloss |
| Selected size | Half Pint |
| Base | water (acrylic) |
| Use | interior/exterior |
| Coverage | 40-90 sq ft/quart practical coverage |
| Touch dry | 30 minutes |
| Recoat | 2-4 hours |
| Application conditions | Air and surface 50-90°F; humidity below 65% |
| Apply with | Synthetic brush |
| Thinning | Not required; in hot, dry conditions up to 2 oz water per quart |
| Cleanup | Soap and water |
| VOC | <200 g/L for gloss acrylic |
| Manufacturer part # | 1992730 |
How to apply
Start with the manufacturer's preparation steps: Clean and dry; remove grease and loose paint or rust; Sand smooth glossy surfaces; Prime bare wood and metal.
- Clean and dry surface; prime bare wood or metal
- Stir paint thoroughly
- Apply with synthetic brush in light even strokes
- Recoat after 2-4 hours
Good to know
None assigned: Gloss Black half-pint SDS: no OSHA GHS symbol or signal word assigned.
Questions
How much will I need?
Use these manufacturer coverage figures: 40-90 sq ft/quart practical coverage. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 2-4 hours. Follow the application conditions and instructions for this product.