Rust-Oleum Chalked Ultra Matte Paint, Aged Gray, Quart
Rust-Oleum Chalked Ultra Matte Paint, Aged Gray, Quart is intended for interior use.
Features
- Ultra matte finish
- Water based acrylic
- Can be distressed
- One coat coverage on many surfaces
Best for
Wood; Metal; Ceramic; Glass; Canvas; Furniture; Home decor
Specs
| Color or finish | Aged Gray |
|---|---|
| Selected size | Quart |
| Base | water-based acrylic |
| Use | interior |
| Coverage | 110-150 sq ft/quart |
| Touch dry | 30 minutes at 77°F and 50% RH |
| Recoat | 2 hours in TDS; product page says 30 minutes |
| Application conditions | 50-90°F and below 85% relative humidity |
| Coats | One generally; up to three for desired appearance |
| Apply with | Synthetic brush |
| Thinning | Normally none; up to 2 oz fresh water per quart in hot dry conditions |
| Cleanup | Soap and water |
| VOC | Less than 75 |
| Topcoat compatibility | Rust-Oleum Chalked Protective Topcoat optional |
| Manufacturer part # | 285143 |
How to apply
Start with the manufacturer's preparation steps: Wash off dirt, grease, oil, salt and contaminants; Remove loose paint and rust; Lightly sand glossy or porous surfaces; Remove wax with mineral spirits.
- Clean surface and sand glossy areas
- Stir without shaking
- Brush in even light strokes
- Wait 2 hours before recoating or distressing
- Optionally apply Chalked Protective Topcoat
Good to know
Use limits: Exterior use; Roller application.
None: Aged Gray representative SDS has no assigned signal word. Hazard classifications may vary by color.
Questions
How much will I need?
Use these manufacturer coverage figures: 110-150 sq ft/quart. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 2 hours in TDS; product page says 30 minutes. Follow the application conditions and instructions for this product.