ProLuxe Door & Window Wood Finish, Colorless, Satin, Quart
ProLuxe Door & Window Wood Finish, Colorless, Satin, Quart is intended for exterior use.
Features
- High-solids alkyd oil
- Transoxide pigments
- UV absorbers
- Water repellent
- Mildew-resistant finish
Best for
Exterior doors; Window frames; Garage doors
Specs
| Color or finish | Colorless |
|---|---|
| Sheen | Satin |
| Selected size | Quart |
| Base | alkyd oil |
| Use | exterior |
| Coverage | 350-450 sq ft/gallon on smooth surfaces or hardwoods |
| Touch dry | 12 hours |
| Recoat | 24 hours |
| Full cure | Full service in 1 week |
| Application conditions | 50-90°F; surface at least 5°F above dew point |
| Coats | 3 |
| Apply with | Natural bristle brush; Roller with immediate back brushing; Airless spray with immediate back brushing |
| Cleanup | Mineral spirits |
| VOC | <350 |
| Manufacturer part # | SIK48003/04 |
How to apply
Start with the manufacturer's preparation steps: Clean, dry wood free of dirt, grease, mildew, mill glaze, and prior coatings; Wash, scrub, and rinse with 500-800 psi; Allow to dry 48 hours or to 18% or less moisture; Sand 80-120 grit with grain.
Good to know
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
How much will I need?
Use these manufacturer coverage figures: 350-450 sq ft/gallon on smooth surfaces or hardwoods. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 24 hours. Follow the application conditions and instructions for this product.