Preserva Premium Timber Oil, Natural Timber, Gallon
Preserva Premium Timber Oil, Natural Timber, Gallon is intended for exterior use.
Features
- Penetrating stain and sealer
- Natural seed oils
- Alkyd and urethane resin system
- Transparent iron oxide pigments for UV protection
- One coat
Best for
Exterior softwood; Exterior hardwood; Deck boards; Fencing; Wood siding
Specs
| Color or finish | Natural Timber |
|---|---|
| Selected size | Gallon |
| Base | oil-based alkyd/urethane resin system |
| Use | exterior |
| Coverage | Smooth deck boards 300-400 sq ft/gal; rough fencing or siding approximately 150-200 sq ft/gal |
| Full cure | 48 hours at 60-70°F per TDS product specifications |
| Application conditions | 60-90°F on cool, dry wood |
| Coats | One coat only |
| Apply with | Oil-based brush or stain pad on horizontal/smooth wood; Roller or pump sprayer followed by back-brushing on vertical wood |
| Thinning | Do not thin |
| Cleanup | Paint thinner for tools and equipment |
| VOC | <250 |
| Manufacturer part # | 70102 |
How to apply
Start with the manufacturer's preparation steps: Remove previous stain/coatings that block penetration; Clean dirt, pollen and mildew; Rinse and allow wood 24 hours to dry; Allow heavy or wet boards 3-6 weeks to air dry; Test color and penetration on small area.
- Clean, remove blocking coatings, and dry wood
- Stir well, then stir every 10-15 minutes during use
- Test color and penetration before full application
- Apply one coat to cool, dry wood, keeping a wet edge
- Remove surface excess within 15 minutes
- Soak used oily rags in water to prevent spontaneous combustion
Good to know
Use limits: Nonwood surfaces; Wood that will not absorb stain.
Danger: SDS: may cause genetic effects and cancer; suspected of damaging unborn child; may be fatal if swallowed and enters airways; serious skin and eye irritation; oil-soaked rags can spontaneously combust.
Questions
How much will I need?
Use these manufacturer coverage figures: Smooth deck boards 300-400 sq ft/gal; rough fencing or siding approximately 150-200 sq ft/gal. Match the figure to the container size, and account for the stated number of coats.
How should I clean up?
The manufacturer specifies Paint thinner for tools and equipment. Follow the product label for cleanup and disposal.