Skip to content
FREE SHIPPING ON ORDERS $35+ | Premium Paint & Supplies
Free Shipping $35+

Penofin Verde Zero VOC Stain, Rosewood, Gallon

by Penofin
Original price $103.32 - Original price $103.32
Original price
$103.32
$103.32 - $103.32
Current price $103.32

Penofin Verde Zero VOC Stain, Rosewood, Gallon is intended for interior/exterior use.

Features

  • Petroleum-free oil finish
  • >95% bio-based content
  • 99% ultraviolet protection
  • Virtually odorless
  • Soap-and-water cleanup
  • 21 published colors

Best for

Interior and exterior wood decks; Log homes; Siding; Fences; Cabinetry; Docks; Floors; Doors; Windows

Specs

Color or finish Rosewood
Selected size Gallon
Base oil; Brazilian rosewood and other natural oils, vegetable ester solvents
Use interior/exterior
Coverage 175-300 sq ft/gallon
Touch dry 3-4 hours
Full cure 4-7 days
Application conditions 45-85°F; humidity maximum 85%
Coats One liberal coat; remove excess after penetration
Apply with Brush; Stain pad; Sprayer
Cleanup Soap and water
VOC TDS <0.1 g/L; current page <1 g/L
Manufacturer part # F0VRWGA

How to apply

Start with the manufacturer's preparation steps: Interior: sand hardwoods 60-80 grit or softwoods 100-120 grit, remove dust, dry 24-48 hours; Exterior new wood: First Step Prep for dirt and mill glaze; Exterior old bare wood: Pro-Tech Cleaner #2, Brightener #3 if gray; Previously treated with non-Penofin product: strip, clean, brighten.

  1. Prepare clean, dry, bare wood
  2. Test color in an inconspicuous area
  3. Stir thoroughly before and during application
  4. Apply liberal coat with brush, pad, or sprayer
  5. Allow 20-30 minutes to penetrate, then wipe all excess

Good to know

Use limits: Hot wood; Finish left unwiped on wood surface.

Warning: Causes eye irritation; may cause allergic skin reaction

Danger: Oil-soaked rags can ignite spontaneously; store in a sealed water-filled metal container

Questions

How much will I need?

Use these manufacturer coverage figures: 175-300 sq ft/gallon. Match the figure to the container size, and account for the stated number of coats.

How should I clean up?

The manufacturer specifies Soap and water. Follow the product label for cleanup and disposal.

Manufacturer directions and product information