Penofin Stain & Sealer, Dark Walnut, Gallon
Penofin Stain & Sealer, Dark Walnut, Gallon is intended for exterior use.
Features
- Penetrating oil stain and sealer
- UV protection
- Mold and mildew protection
- No wiping or back brushing required
- Water resistance
- Matte sheen
Best for
Exterior decking; Siding; Fencing; Steps; Railings; Furniture
Specs
| Color or finish | Dark Walnut |
|---|---|
| Selected size | Gallon |
| Base | oil; mineral oil and long oil alkyd resin |
| Use | exterior |
| Coverage | Smooth surfaces approximately 125-175 sq ft/gallon |
| Touch dry | 24 hours, depending on thickness and conditions |
| Recoat | After 1 hour if applying two thin coats |
| Full cure | 72 hours |
| Application conditions | 40-90°F |
| Coats | One thick coat or two thin coats; TDS technical table says two coats required |
| Apply with | Brush; Stain pad; Roller; Pump sprayer; Airless sprayer |
| Thinning | Do not thin |
| Cleanup | Mineral spirits or paint thinner |
| VOC | <100 g/L |
| Manufacturer part # | FSSDWGA |
How to apply
Start with the manufacturer's preparation steps: Ensure wood is sound and completely dry; Remove dirt, mildew stains, loose wood fibers and old coatings; Prep new wood with First Step Prep; Test small inconspicuous area.
- Clean, dry, and prepare the wood
- Stir before and during application
- Apply one thick or two thin coats
- Distribute pooled product on horizontal surfaces; do not remove excess
- If using two thin coats, wait one hour between coats
- Allow 72 hours before heavy use or replacing furniture
Good to know
Use limits: Wet wood; Old surface coatings without sanding or stripping; Removing excess stain after application.
WARNING: Harmful if swallowed or inhaled; causes eye irritation; may cause allergic skin reaction
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
How much will I need?
Use these manufacturer coverage figures: Smooth surfaces approximately 125-175 sq ft/gallon. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is After 1 hour if applying two thin coats. Follow the application conditions and instructions for this product.