Penofin Pro-Tech Wood Stripper, Light Yellow, Quart
Penofin Pro-Tech Wood Stripper, Light Yellow, Quart is intended for exterior use.
Features
- Softens most oil-based coatings in 15-30 minutes
- Zero VOC
Best for
Oil-based coatings on exterior wood; TDS also lists oil finishes on composite and concrete
Specs
| Color or finish | Light Yellow |
|---|---|
| Selected size | Quart |
| Base | water (SDS says 96% water) |
| Use | exterior |
| Coverage | Approximately 75 sq ft/quart or 300-400 sq ft/gallon |
| Touch dry | 24 hours |
| Application conditions | TDS says no temperature restrictions, but wood should not be hot to touch |
| Apply with | Plastic garden pump sprayer; Non-metallic bristle brush or push broom |
| Thinning | Do not thin or blend with other products |
| Cleanup | Rinse equipment with water |
| VOC | 0 |
| Topcoat compatibility | Follow with Pro-Tech Cleaner Step 2 and Brightener Step 3 before Penofin stain |
| Manufacturer part # | FTECHQT |
How to apply
Start with the manufacturer's preparation steps: Sweep or blow off debris; Protect adjacent metal, glass and vegetation; Wet surface with water.
- Shake; wet wood with water
- Apply generously with plastic pump sprayer
- Keep wet for 15-30 minutes
- Scrub with non-metallic brush and rinse thoroughly
- Follow with Cleaner Step 2 and Brightener Step 3
Good to know
Use limits: Water-based or resin-based coatings; Metal storage containers.
Warning: Potassium hydroxide solution: causes skin irritation and serious eye irritation; SDS lists corrosive transport class 8.
Questions
How much will I need?
Use these manufacturer coverage figures: Approximately 75 sq ft/quart or 300-400 sq ft/gallon. Match the figure to the container size, and account for the stated number of coats.
How should I clean up?
The manufacturer specifies Rinse equipment with water. Follow the product label for cleanup and disposal.