Old Masters Oil-Based Sanding Sealer, Clear, Quart
Old Masters Oil-Based Sanding Sealer, Clear, Quart is intended for interior use.
Features
- Sandable basecoat
- Clear
- One coat seals
Best for
Bare interior wood; Stained interior wood
Specs
| Color or finish | Clear |
|---|---|
| Selected size | Quart |
| Base | oil |
| Use | interior |
| Coverage | Approximately 300 to 450 sq ft/gal |
| Touch dry | 2 to 3 hours |
| Recoat | Sand after 3 hours when thoroughly dry; then topcoat |
| Application conditions | Air and surface 60°F to 90°F; humidity 30% to 70% |
| Coats | One coat seals and prepares surface |
| Apply with | Pure bristle brush; Polyester brush; Spray |
| Thinning | Do not thin |
| Cleanup | Paint thinner or mineral spirits |
| VOC | 550 |
| Topcoat compatibility | Varnish or polyurethane clear finish after sealer dries and is sanded; see manufacturer instructions |
| Manufacturer part # | 45004 |
How to apply
Start with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand new wood medium to fine and remove dust; Remove old finish from previously finished wood; Ensure stain is thoroughly dry.
- Prepare bare or stained wood
- Stir; do not shake
- Apply one liberal coat with grain
- Wait until fully dry, at least about 3 hours, then sand fine
- Remove dust and topcoat
Good to know
Danger: Flammable liquid and vapor; skin sensitization, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration hazards.
Danger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.
Questions
How much will I need?
Use these manufacturer coverage figures: Approximately 300 to 450 sq ft/gal. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is Sand after 3 hours when thoroughly dry; then topcoat. Follow the application conditions and instructions for this product.