Old Masters Oil-Based Gel Polyurethane, Satin, Quart
Old Masters Oil-Based Gel Polyurethane, Satin, Quart is intended for interior use.
Features
- Thick gel clear finish
- Hand-applied satin sheen
- No sanding needed between coats
Best for
Interior wood; Cabinets; Furniture; Woodwork; Trim; Antiques; Thoroughly dry stained wood
Specs
| Color or finish | Clear |
|---|---|
| Sheen | Satin |
| Selected size | Quart |
| Base | oil |
| Use | interior |
| Coverage | Approximately 700 to 750 sq ft/gal |
| Touch dry | 5 to 6 hours at 70°F and 50% RH |
| Recoat | At least 6 hours; overnight in high humidity |
| Application conditions | Air and surface 60°F to 90°F; humidity 30% to 70% |
| Coats | Two to three |
| Apply with | Soft lint-free cloth; Paper towel |
| Thinning | Do not thin |
| Cleanup | Paint thinner or mineral spirits |
| VOC | Maximum 450 |
| Manufacturer part # | 85104 |
How to apply
Start with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, grease, glue and contaminants; Sand wood smooth and remove dust; Allow stained or previously finished wood at least 24 hours drying.
- Prepare wood; stir product
- Apply to a section with soft cloth
- Quickly remove excess and buff with clean cloth along grain
- Allow at least 6 hours between coats
- Apply two to three coats
Good to know
Danger: Flammable liquid and vapor; skin sensitization, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration hazards.
Danger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.
Questions
How much will I need?
Use these manufacturer coverage figures: Approximately 700 to 750 sq ft/gal. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is At least 6 hours; overnight in high humidity. Follow the application conditions and instructions for this product.