Old Masters Low VOC Wood Conditioner, Gallon
Old Masters Low VOC Wood Conditioner, Gallon is the Clear, Gallon item in this product line.
Features
- Clear pre-stain sealer
- Helps even stain absorption
- Low VOC formula for specified regions
Best for
Soft woods including pine, fir, maple, poplar, hemlock
Specs
| Color or finish | Clear |
|---|---|
| Selected size | Gallon |
| Base | oil |
| Coverage | Approximately 400 to 500 sq ft/gal |
| Touch dry | Approximately 8 hours |
| Recoat | Apply oil-based stain after 8 hours; water-based stain after at least 24 hours |
| Coats | One application |
| Apply with | Polyester brush; Nylon brush |
| Thinning | Do not thin |
| Cleanup | Paint thinner or mineral spirits |
| VOC | Maximum 100 |
| Topcoat compatibility | Under oil-based stain after 8 hours or water-based stain after minimum 24 hours |
| Manufacturer part # | 51101 |
How to apply
Start with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand bare wood medium to fine with grain; remove dust without tack rag; Strip previously finished surfaces to bare wood.
- Prepare bare wood and remove dust
- Stir thoroughly
- Brush over entire surface
- Allow 5 to 15 minutes penetration, wipe excess without leaving surface film
- Wait 8 hours for oil stain or 24 hours for water stain
Good to know
Use limits: As a sanding sealer.
Danger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, and suspected reproductive harm.
Danger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.
Questions
How much will I need?
Use these manufacturer coverage figures: Approximately 400 to 500 sq ft/gal. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is Apply oil-based stain after 8 hours; water-based stain after at least 24 hours. Follow the application conditions and instructions for this product.