Old Masters Fast Dry Stain, Cedar, Half Pint
Old Masters Fast Dry Stain, Cedar, Half Pint is intended for interior use.
Features
- Fast drying
- 22 listed factory colors
- Colors may be intermixed or tinted
Best for
Interior wood; Cabinets; Doors; Floors; Furniture; Woodwork
Specs
| Color or finish | Cedar |
|---|---|
| Selected size | Half Pint |
| Base | oil-based alkyd |
| Use | interior |
| Coverage | Approximately 500 sq ft/gal |
| Touch dry | TDS technical table: 30 to 60 minutes at 70°F and 50% RH |
| Application conditions | Ideal drying conditions 70°F to 75°F and 35% to 50% RH |
| Apply with | Brush; Spray; Wipe |
| Thinning | Do not thin |
| Cleanup | Paint thinner or mineral spirits |
| VOC | 550 |
| Topcoat compatibility | Oil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible |
| Manufacturer part # | 60916 |
How to apply
Start with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.
- Prepare bare interior wood
- Stir before and during use
- Brush, spray, or wipe on stain
- Wipe off excess with soft cloth before stain dries
- Let stain dry thoroughly before applying a topcoat
Good to know
Use limits: Previously finished surfaces until old finish is completely removed.
Danger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.
Danger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.
Questions
How much will I need?
Use these manufacturer coverage figures: Approximately 500 sq ft/gal. Match the figure to the container size, and account for the stated number of coats.
How should I clean up?
The manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.