Okon Seal & Finish Concrete and Masonry Sealer, Clear, Gallon
by Okon
Original price
$73.80
-
Original price
$73.80
Original price
$73.80
$73.80
-
$73.80
Current price
$73.80
Okon Seal & Finish Concrete and Masonry Sealer, Clear, Gallon is intended for interior and exterior use.
Features
- Clear low-gloss
- Non-yellowing
- Breathable
- Paintable
Best for
Horizontal concrete; Patios; Walkways; Basements; Concrete stains
Specs
| Color or finish | Clear |
|---|---|
| Selected size | Gallon |
| Base | water-based micro-acrylic emulsion |
| Use | interior and exterior |
| Coverage | Approximately 150-250 sq ft/gallon depending on surface texture and coat |
| Recoat | 3 hours or when dry to touch |
| Apply with | Brush; 1/8-in nap roller; Pad; Garden sprayer; Airless sprayer |
| Thinning | Ready to use; do not thin |
| Cleanup | Water |
| VOC | <50 |
| Topcoat compatibility | Can be applied over or under concrete coatings |
| Manufacturer part # | OK941 |
How to apply
Start with the manufacturer's preparation steps: Clean, dry, sound concrete; Allow new concrete to cure 28 days; Check for subsurface moisture.
Good to know
Use limits: Driveways; Garages; Hot-car-tire exposure for tinted finishes.
Questions
How much will I need?
Use these manufacturer coverage figures: Approximately 150-250 sq ft/gallon depending on surface texture and coat. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 3 hours or when dry to touch. Follow the application conditions and instructions for this product.