Modern Masters Venetian Plaster, Tint Base, Gallon
Modern Masters Venetian Plaster, Tint Base, Gallon is intended for interior use.
Features
- Tintable acrylic plaster
- Two tint bases
- Burnishable surface
- Sheen varies with polishing
Best for
Interior decorative walls; Prepared low-sheen primed surfaces
Specs
| Color or finish | Tint Base |
|---|---|
| Selected size | Gallon |
| Base | water-based acrylic |
| Use | interior |
| Coverage | TDS 170-190 sq ft/gallon at recommended dry film thickness; current page 150-200 sq ft/gallon |
| Touch dry | 30 minutes at 70-80°F and 50% relative humidity |
| Recoat | 2 hours |
| Full cure | 8 hours |
| Application conditions | Do not apply below 55°F |
| Coats | Three thin layers: skim, texture, skim |
| Apply with | Japanese trowel; Spatula |
| Cleanup | Soap and warm water |
| VOC | 46 g/L |
| Topcoat compatibility | Use Modern Masters Venetian Plaster Clear Topcoat VP300QT for high traffic or humid areas; other protective topcoats cannot be used |
| Manufacturer part # | VP100GAL |
How to apply
Start with the manufacturer's preparation steps: Fill cracks and nail holes; Prime with low-sheen primer-sealer, preferably tinted near chosen plaster color; Test color and technique on sample board.
- Prepare and prime smooth surface
- Apply thin skim coat, scrape off excess, dry 1 hour
- Apply texture coat, smooth peaks, dry 1-2 hours
- Apply second skim coat, dry 1 hour
- For marble look, sand dry finish with 400 grit then 600 grit and burnish
- Apply VP300 clear topcoat where extra protection is needed
Good to know
Use limits: Unprimed or uneven surfaces; Scrubbable or water-resistant use without VP300 topcoat; Other protective topcoats.
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
How much will I need?
Use these manufacturer coverage figures: TDS 170-190 sq ft/gallon at recommended dry film thickness; current page 150-200 sq ft/gallon. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 2 hours. Follow the application conditions and instructions for this product.