Modern Masters Metallic Paint, Silver, Satin, Quart
Modern Masters Satin Metallic Paint in Silver, Quart, is the selected water-based decorative finish. The current manufacturer TDS 30 fl oz basis gives about 49–75 sq ft per coat as a proportional estimate, not confirmed pictured-can yield.
Features
- Satin metallic color adds luster to decorative projects.
- Brush, roll or use the specified spray setup.
- Factory color samples help plan a test board.
- Soap-and-water cleanup keeps tools reusable.
Best for
Properly primed interior walls, ceilings, columns, trim, doors, furniture and paintable wallcoverings. The manufacturer classifies this color as opaque.
Specs
| Color / selected size | Silver / Quart |
|---|---|
| Base / sheen / use | Water-based acrylic / Satin / interior; exterior requires MasterClear UV topcoat |
| Coverage basis | about 49–75 sq ft/30 fl oz; proportional TDS estimate, current supplied fill unverified |
| Coats / tools | 2; opaque / brush, roller, specified pressure-pot spray |
| Thinning / extender | Spray: up to 16 fl oz water/US gallon; rolling: up to 16 fl oz Rolling Extender/US gallon |
| Touch / recoat / cure | About 1 hour / 30 minutes / 24 hours; see conditions below |
| Conditions / cleanup | 58–85°F / soap and warm water |
| Current exact-code SDS VOC | 84 g/L; dated 2/16/2026, not lot or sale-compliance proof |
| Manufacturer part # | ME15032 |
The TDS practical range is 208–320 sq ft/gallon at 1.5 mil dry film with 15% material loss; the product page separately lists 320–400. The TDS application prose allows about 1 hour touch dry at 70°F/50% RH; its table lists 30 minutes touch, 1 hour handle, 30 minutes recoat and 24 hours cure at 70–80°F/50% RH. Conditions change drying.
How to apply
- Remove dirt, grease and loose paint. Prime the clean, dry surface with a compatible recommended primer; let it dry, preferably overnight. Stir thoroughly and test a sample board.
- Apply at 58–85°F with a water-based latex brush or roller. When rolling, follow the extender limit above; work in 4-foot sections, keep a wet edge and back-roll in one direction.
- For spraying, use the specified pressure-pot HVLP or conventional cup setup, ventilation and a NIOSH-approved respirator. Follow the water limit above; excess thinning reduces hide. Do not use turbine-powered HVLP or airless equipment.
- Follow the can’s drying directions and color’s coat count. Clean tools promptly with soap and warm water. Seal unused paint; store cool, dry and out of sunlight; avoid freezing.
Good to know
The current exact-code SDS assigns no signal word. This does not mean every color or exposure is harmless. Read the SDS for ME15032, dated 2/16/2026, and your can label. Ventilate, avoid breathing spray or sanding dust, wear gloves and splash eye protection. Removing old paint can release toxic lead; use proper respiratory protection, HEPA and wet cleanup. Dispose of paint and containers under local rules.
Questions
How many coats? The manufacturer recommends two coats for this opaque color.
Can I use it outdoors? The TDS requires MasterClear UV Protective Clear Topcoat for exterior use; it also helps demanding interior surfaces.
Why do package volumes differ? The PSS photograph prints 1 Qt/946 mL; the current TDS lists 30 fl oz. Confirm the current can’s filled volume and label; common item code alone does not resolve the difference.
Will the images match my project? The first photo is supplier-supplied packaging, the group shows family packages, and the last is the named manufacturer color sample. Test the color and technique on your substrate before the project.