Modern Masters Metal Effects Oxidizing Paint, Bronze, 6 oz
Modern Masters Metal Effects Oxidizing Paint, Bronze, 6 oz is intended for interior/exterior use.
Features
- Contains real metal particles
- Bronze develops blue patina with Blue Patina Aging Solution
- Copper develops green patina with Green Patina Aging Solution
- Iron develops rust with Rust Activator
- Applicable on primed interior and exterior surfaces
Best for
Properly primed metal; wood; drywall; plaster; paintable wall coverings; canvas or muslin; plastic
Specs
| Color or finish | Bronze |
|---|---|
| Selected size | 6 oz |
| Base | water-based modified acrylic with metal particles |
| Use | interior/exterior |
| Coverage | See variant-specific values |
| Touch dry | 1 hour |
| Recoat | See variant-specific values |
| Full cure | 3-4 hours for paint; Permacoat Xtreme protective coating cures in 7-10 days |
| Application conditions | 55-85°F |
| Coats | 2 paint coats, after 2 primer coats |
| Apply with | brush; roller; conventional spray; HVLP |
| Thinning | For spray, clean water up to 12.5% by volume; do not overthin |
| Cleanup | Soap and warm water immediately after use |
| VOC | See variant-specific values |
| Topcoat compatibility | Use Metal Effects Permacoat Xtreme when a protective coating is needed; do not use other sealers or varnishes |
| Manufacturer part # | ME39606 |
How to apply
Start with the manufacturer's preparation steps: Remove dirt, oil and contaminants; rinse and dry; Sand glossy prior coatings; Use suitable specialty primer on certain metals, then 2 coats of Metal Effects Primer.
- Clean, dry and prime with at least two Metal Effects Primer coats
- Apply two coats of the selected Oxidizing Paint
- Apply matching aging solution as directed by the color-specific TDS
- If required, topcoat only with Permacoat Xtreme after the developed finish dries
Good to know
Use limits: Airless spray systems; Turbine-type air compressors for HVLP; Other sealers or varnishes over developed patina or rust.
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
How much will I need?
Use these manufacturer coverage figures: See variant-specific values. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is See variant-specific values. Follow the application conditions and instructions for this product.