Modern Masters Metal Effects Blue, Green Patina Aging Solution, 4 oz
Modern Masters Metal Effects Blue, Green Patina Aging Solution, 4 oz is intended for interior/exterior as part of Metal Effects system use.
Features
- Acidic water solution
- Reacts with real metal in oxidizing paint
- Blue solution develops blue patina
- Green solution develops green patina
Best for
Blue solution over Modern Masters Oxidizing Bronze Paint; Green solution over Modern Masters Oxidizing Copper Paint
Specs
| Color or finish | Green Patina Aging Solution |
|---|---|
| Selected size | 4 oz |
| Base | acidic solution in water |
| Use | interior/exterior as part of Metal Effects system |
| Coverage | Blue 230-290 sq ft/gallon; Green 230-290 sq ft/gallon in paint system TDS |
| Touch dry | Activated surface develops patina as it dries in approximately 30-40 minutes |
| Application conditions | Paint system TDS says do not apply below 55°F or above 85°F |
| Coats | One application of aging solution while second paint coat is wet |
| Apply with | Brush; Sea sponge; Plastic pump sprayer |
| Cleanup | Soap and warm water immediately after use |
| VOC | 0 g/L in paint-system TDS |
| Topcoat compatibility | Metal Effects Permacoat Xtreme if protection needed; do not use other sealers or varnishes |
| Manufacturer part # | PA90104 |
How to apply
Start with the manufacturer's preparation steps: Apply two coats Metal Effects Primer; Apply two coats matching Oxidizing Paint; For blue or green patina, apply solution within five minutes while second paint coat is wet.
- Prime and apply matching oxidizing paint
- Apply matching aging solution to wet second paint coat
- Allow patina to develop and dry
Good to know
Use limits: Uncoated substrate; Unmatched oxidizing paint.
Danger: Blue gallon SDS: causes severe skin burns and serious eye damage.
Danger: Green gallon SDS: causes serious eye damage.
Questions
How much will I need?
Use these manufacturer coverage figures: Blue 230-290 sq ft/gallon; Green 230-290 sq ft/gallon in paint system TDS. Match the figure to the container size, and account for the stated number of coats.
How should I clean up?
The manufacturer specifies Soap and warm water immediately after use. Follow the product label for cleanup and disposal.