Minwax Wood Finish Oil-Based Stain, Special Walnut, Half Pint
Minwax Wood Finish Oil-Based Stain, Special Walnut, Half Pint is intended for interior use.
Features
- Penetrating oil stain
- Semi-transparent color enhances wood grain
- Resists lapping
- One-coat color
Best for
Bare or stripped interior wood furniture, cabinets, doors, trim, molding and hardwood floors
Specs
| Color or finish | Special Walnut |
|---|---|
| Selected size | Half Pint |
| Base | oil |
| Use | interior |
| Coverage | 400-500 sq ft/gallon |
| Touch dry | 2 hours |
| Recoat | PDS physical data says 1 hour; application instructions say recoat after 2 hours |
| Application conditions | PDS dry times specified at 77°F and 50% relative humidity; application temperature not stated |
| Coats | One coat for color; recoat if darker color desired, then use protective topcoat |
| Apply with | Clean cloth; Brush; Foam applicator |
| Thinning | Do not thin |
| Cleanup | Regionally compliant cleaner for tools; soap and water for hands |
| VOC | PDS: 550 g/L, less exempt solvents |
| Topcoat compatibility | Protect with clear topcoat such as Minwax Fast-Dry Polyurethane or Polycrylic Protective Finish |
| Manufacturer part # | 22240 |
How to apply
Start with the manufacturer's preparation steps: Start with clean, dry bare or stripped wood; Sand with 220-grit in grain direction and remove dust; Apply Pre-Stain Wood Conditioner, especially on softwoods; Test color on hidden area.
- Sand and clean bare wood; consider conditioner
- Stir stain and test on hidden spot
- Apply stain and wipe excess with grain
- Recoat after 2 hours if darker color wanted; do not sand between coats
- Let dry and apply a protective topcoat
Good to know
Use limits: Exterior use.
Danger: Honey SDS: flammable liquid/vapor; aspiration hazard; suspected cancer risk; may damage organs with repeated exposure. Color-specific SDSs must be checked.
: Product page includes California warning for cancer and reproductive harm.
Questions
How much will I need?
Use these manufacturer coverage figures: 400-500 sq ft/gallon. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is PDS physical data says 1 hour; application instructions say recoat after 2 hours. Follow the application conditions and instructions for this product.