Minwax Water-Based Semi-Transparent Stain, True Black, Quart
by Minwax
Original price
$22.30
-
Original price
$22.30
Original price
$22.30
$22.30
-
$22.30
Current price
$22.30
Minwax Water-Based Semi-Transparent Stain, True Black, Quart is intended for interior use.
Features
- 240 colors shown on manufacturer page
- Packaged Classic Gray and True Black match PSS
- Tintable water-based formula
- One-coat color
- Shows wood grain
Best for
Interior unfinished furniture; Cabinets; Doors; Trim; Small wood projects
Specs
| Color or finish | True Black |
|---|---|
| Selected size | Quart |
| Base | water |
| Use | interior |
| Coverage | 100 sq ft/quart |
| Touch dry | Less than 15 minutes at 77°F and 50% RH |
| Recoat | 1-2 hours |
| Application conditions | Above 50°F; below 85% relative humidity |
| Coats | One for color; optional second to intensify |
| Apply with | Synthetic bristle brush; Lint-free rag to remove excess |
| Thinning | Do not thin |
| Cleanup | Soap and warm water immediately after use |
| VOC | Less than 250 |
| Topcoat compatibility | Minwax Polycrylic after 2-3 hours; manufacturer also lists Fast-Drying Polyurethane |
| Manufacturer part # | 10850 |
How to apply
Start with the manufacturer's preparation steps: Dry, clean bare or stripped wood; Sand smooth and remove dust; Water-based pre-stain conditioner recommended, especially on soft wood.
- Prepare dry, clean, sanded wood
- Apply water-based pre-stain conditioner for even color
- Stir stain, do not shake or thin
- Apply with synthetic bristle brush with grain
- Wipe excess within 2 minutes
- Allow 1-2 hours before optional recoat; do not sand between stain coats
- Apply clear protective topcoat after drying
Good to know
Use limits: Floors; Surfaces continuously wet or under water.
Questions
How much will I need?
Use these manufacturer coverage figures: 100 sq ft/quart. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 1-2 hours. Follow the application conditions and instructions for this product.