Minwax Super Fast-Drying Polyurethane for Floors, Clear Satin, Gallon
Minwax Super Fast-Drying Polyurethane for Floors, Clear Satin, Gallon is intended for interior use.
Features
- Linseed oil modified polyurethane
- No sanding between coats if recoated within 12 hours
- Light foot traffic after 12-18 hours
Best for
Interior hardwood floors
Specs
| Color or finish | Clear Satin |
|---|---|
| Sheen | Satin |
| Selected size | Gallon |
| Base | oil |
| Use | interior |
| Recoat | 3-4 hours, less than 12 hours to avoid sanding between coats |
| Application conditions | Dry times based on 77°F and 50% relative humidity |
| Coats | 2 for stain or screen and recoat; 3 for bare wood |
| Apply with | Natural bristle brush; Foam brush; Lambswool pad; Synthetic pad |
| Cleanup | Mineral spirits or paint thinner |
| Topcoat compatibility | Over Minwax Wood Finish, Sanding Sealer, Gel Stain or Water-Based Wood Stain |
| Manufacturer part # | 13022 |
How to apply
Start with the manufacturer's preparation steps: Sand floor smooth; use 100 grit maximum if staining/sealing, 120 grit maximum otherwise; For sound existing finishes, lightly sand with 120 grit; Remove dust with mineral spirits dampened cloth.
- Stir before use
- Apply thin coat and maintain wet edge
- Wait 3-4 hours before recoating
- Apply second coat, or three total on bare wood
- Allow 12-18 hours before light foot traffic
Good to know
Danger: Flammable liquid and vapor; aspiration hazard; may cause skin allergy, drowsiness or dizziness; suspected cancer; may damage fertility or unborn child.
: California warning for cancer and birth defects or other reproductive harm.
Questions
When can I apply another coat?
The listed manufacturer recoat guidance is 3-4 hours, less than 12 hours to avoid sanding between coats. Follow the application conditions and instructions for this product.