Minwax Pre-Stain Wood Conditioner, Clear, Half Pint
Minwax Pre-Stain Wood Conditioner, Clear, Half Pint is the Clear, Half Pint item in this product line.
Features
- Promotes even oil-based stain absorption
- Reduces streaking and blotching
Best for
New or bare wood before oil-based stain; Pine; Fir; Spruce; Maple; Alder; Aspen
Specs
| Color or finish | Clear |
|---|---|
| Selected size | Half Pint |
| Base | oil |
| Coverage | 500 sq ft/gallon |
| Touch dry | 15 minutes |
| Coats | 1; additional coats may be used on highly absorbent wood |
| Apply with | Brush; Cloth |
| Thinning | Do not thin |
| Cleanup | Mineral spirits, paint thinner or turpentine |
| VOC | 350 |
| Topcoat compatibility | Use before Minwax Wood Finish, Gel Stain, PolyShades or WoodSheen; stain within 2 hours |
| Manufacturer part # | 13407 |
How to apply
Start with the manufacturer's preparation steps: Clean, raw, dry wood; Sand with 220 grit and remove dust.
- Apply to clean raw wood with brush or cloth
- Allow to penetrate 5-15 minutes
- Wipe off excess
- Apply oil-based stain within 2 hours
Good to know
Use limits: Water-based stains.
Danger: Flammable liquid and vapor; aspiration hazard; may cause drowsiness or dizziness and organ damage from repeated exposure.
: Soaked rags may spontaneously catch fire; California cancer warning.
Questions
How much will I need?
Use these manufacturer coverage figures: 500 sq ft/gallon. Match the figure to the container size, and account for the stated number of coats.
How should I clean up?
The manufacturer specifies Mineral spirits, paint thinner or turpentine. Follow the product label for cleanup and disposal.