Minwax PolyShades Stain & Polyurethane, Classic Oak, Satin, Half Pint
Minwax PolyShades Stain & Polyurethane, Classic Oak, Satin, Half Pint is intended for interior use.
Features
- Stain and polyurethane in one coat
- Can change color over existing polyurethane
- 14 current colors listed on product page
Best for
Interior wood doors; Trim; Cabinetry; Furniture; Previously stained or varnished wood after prep
Specs
| Color or finish | Classic Oak |
|---|---|
| Sheen | Satin |
| Selected size | Half Pint |
| Base | oil-based soya uralkyd |
| Use | interior |
| Coverage | 2023 PDS states approximately 120 to 150 sq ft but labels the table sq ft/gal; unit should be checked before publishing |
| Touch dry | Approximately 6 hours before handling for recoat |
| Recoat | At least 6 hours |
| Coats | Two to three; third deepens color |
| Apply with | Natural bristle brush; Foam brush per PDS |
| Thinning | Do not thin |
| Cleanup | Regionally compliant cleaner; PDS identifies mineral spirits solvent |
| VOC | Maximum 550 per PDS |
| Topcoat compatibility | May be coated with Minwax Fast-Drying Polyurethane or Wipe-On Poly for protection without more color |
| Manufacturer part # | 21370 |
How to apply
Start with the manufacturer's preparation steps: Clean and dry; remove dirt, grease, glue and dust; Sand bare wood smooth with 220 grit along grain; Lightly sand previously finished wood for adhesion; Oil-based Pre-Stain Wood Conditioner recommended for raw wood.
- Prepare wood and test color
- Stir; do not shake or thin
- Brush on a very thin coat with grain
- Wait at least 6 hours and rub lightly with fine steel wool; remove dust
- Apply second thin coat; third if deeper color desired
Good to know
Use limits: Floors.
Danger: Flammable liquid and vapor; aspiration hazard; may cause allergic skin reaction, drowsiness or dizziness, suspected cancer, and reproductive harm. SDS is for Bombay Mahogany Satin quart.
: California warning for cancer and birth defects or other reproductive harm.
Questions
How much will I need?
Use these manufacturer coverage figures: 2023 PDS states approximately 120 to 150 sq ft but labels the table sq ft/gal; unit should be checked before publishing. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is At least 6 hours. Follow the application conditions and instructions for this product.