Skip to content
FREE SHIPPING ON ORDERS $35+ | Premium Paint & Supplies
Free Shipping $35+

Minwax Polycrylic Protective Finish Spray, Clear Semi-Gloss, 11.5 oz

by Minwax
Original price $19.12 - Original price $19.12
Original price
$19.12
$19.12 - $19.12
Current price $19.12

Minwax Polycrylic Protective Finish Spray, Clear Semi-Gloss, 11.5 oz is intended for interior use.

Features

  • Crystal-clear finish
  • Aerosol application
  • Water cleanup for wet overspray
  • Fast recoat

Best for

Finished or unfinished interior furniture; Louver doors; Molding; Cabinets; Hard-to-reach places

Specs

Color or finish Clear Semi-Gloss
Sheen Semi-Gloss
Selected size 11.5 oz
Base water-based finish in aerosol with flammable propellant
Use interior
Coverage Approximately 20-25 sq ft/can
Touch dry 30 minutes
Recoat 30 minutes
Application conditions Dry times based on 77°F, 50% relative humidity; store below 105°F
Coats At least three on unfinished wood; two on previously finished surfaces
Apply with Aerosol spray
Cleanup Soap and water for wet overspray
Manufacturer part # 34444

How to apply

Start with the manufacturer's preparation steps: Dry, clean surface; Remove poorly adhering old finish; Sand smooth and remove dust; Spot test over white or light paint and stain for possible ambering.

  1. Shake can two minutes, then periodically during use
  2. Mask adjacent surfaces
  3. Spray 6-8 inches from surface with overlapping strokes
  4. Apply several thin coats
  5. Recoat after 30 minutes; sand lightly with 220 grit between coats
  6. Allow 24 hours before heavy use

Good to know

Use limits: Over red mahogany stains; Lacquer, shellac, paint, wax, grease, stearates or polish without removal.

Danger: Extremely flammable aerosol; pressurized container may burst if heated; may cause allergic skin reaction and serious eye irritation.

: California warning for cancer and reproductive harm.

Questions

How much will I need?

Use these manufacturer coverage figures: Approximately 20-25 sq ft/can. Match the figure to the container size, and account for the stated number of coats.

When can I apply another coat?

The listed manufacturer recoat guidance is 30 minutes. Follow the application conditions and instructions for this product.

Manufacturer directions and product information