Minwax Polycrylic Protective Finish, Clear Ultra Flat, Quart
Minwax Polycrylic Protective Finish, Clear Ultra Flat, Quart is intended for interior use.
Features
- Clear non-ambering finish
- Water-based
- Low odor
- Scratch, scuff and spill resistance
Best for
Interior furniture; Trim; Doors; Cabinets; Bare wood; Light woods such as maple, ash and birch
Specs
| Color or finish | Clear Ultra Flat |
|---|---|
| Selected size | Quart |
| Base | water |
| Use | interior |
| Coverage | 125 sq ft/quart |
| Touch dry | Less than 15 minutes at 77°F and 50% RH |
| Recoat | At least 2 hours in application directions; PDS physical table says 1 hour |
| Coats | Three |
| Apply with | Synthetic bristle brush |
| Cleanup | Soap and water per product page |
| VOC | Less than 275 |
| Topcoat compatibility | Over bare wood and dried oil or water-based stains, except red mahogany stain |
| Manufacturer part # | 611114444 |
How to apply
Start with the manufacturer's preparation steps: Dry and free of wax, grease, polish, deteriorated finishes; Sand smooth and remove dust with damp cloth; Do not use steel wool; Allow Minwax Wood Finish stain at least 24 hours before topcoating.
- Prepare clean, dry, smooth wood
- Stir, never shake
- Brush on thin coat with synthetic bristle brush
- After at least 2 hours, sand with 220 grit and remove dust
- Apply three coats total
- Wait 3 hours before light handling, 24 hours before normal use
Good to know
Use limits: Floors; Over red mahogany stains.
Danger: May damage fertility or the unborn child; causes organ damage.
: California warning for cancer and reproductive harm.
Questions
How much will I need?
Use these manufacturer coverage figures: 125 sq ft/quart. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is At least 2 hours in application directions; PDS physical table says 1 hour. Follow the application conditions and instructions for this product.