Minwax Gel Stain, Walnut, Quart
by Minwax
Original price
$23.55
-
Original price
$23.55
Original price
$23.55
$23.55
-
$23.55
Current price
$23.55
Minwax Gel Stain, Walnut, Quart is intended for interior and exterior with suitable protective topcoat use.
Features
- Non-drip gel
- Multi-surface stain
- Ten current colors on product page
Best for
Wood; Plywood; Veneer; Fiberglass; Metal; Molded fiberboard; Vertical doors and molding
Specs
| Color or finish | Walnut |
|---|---|
| Selected size | Quart |
| Base | oil |
| Use | interior and exterior with suitable protective topcoat |
| Coverage | 200 sq ft/quart |
| Recoat | 8-10 hours on wood per current page; PDS gives 6-8 hours in properties table |
| Coats | 1 or 2 on wood; 2 on fiberglass; 1 or 2 on metal |
| Apply with | Brush; Clean cloth; Graining tool for metal doors |
| Thinning | Do not thin |
| Cleanup | Mineral spirits or paint thinner |
| Topcoat compatibility | After 24 hours, interior Minwax polyurethane; exterior Helmsman Spar Urethane |
| Manufacturer part # | 66060 |
How to apply
Start with the manufacturer's preparation steps: Clean, dry surface free of grease and old coating; Sand wood smooth; do not sand fiberglass; Use pre-stain conditioner on soft or porous wood.
- Clean and prepare substrate
- Stir stain; do not shake or thin
- Brush or wipe on
- Wait 3 minutes and wipe excess with grain on wood
- Recoat after 8-10 hours if darker color needed
- Wait 24 hours before protective topcoat
Questions
How much will I need?
Use these manufacturer coverage figures: 200 sq ft/quart. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 8-10 hours on wood per current page; PDS gives 6-8 hours in properties table. Follow the application conditions and instructions for this product.