Minwax Fast-Drying Polyurethane, Clear Satin, Quart
Minwax Fast-Drying Polyurethane, Clear Satin, Quart is intended for interior use.
Features
- Clear oil-based protective finish
- Scratch and spill resistance
- Warm ambering possible on light wood
Best for
Interior furniture; Cabinets; Doors; Floors; Finished and unfinished wood
Specs
| Color or finish | Clear Satin |
|---|---|
| Sheen | Satin |
| Selected size | Quart |
| Base | oil |
| Use | interior |
| Coverage | 600-700 sq ft/gallon |
| Touch dry | 4-6 hours or until dry to touch |
| Recoat | 4-6 hours in PDS application directions; current product page also says 3-4 hours |
| Application conditions | PDS drying and coverage conditions: 77°F, 50% relative humidity |
| Coats | 2-3; three for floors |
| Apply with | Natural bristle brush; Foam brush; Lambswool or synthetic pad applicator for floors |
| Thinning | Do not thin |
| Cleanup | Mineral spirits or paint thinner |
| VOC | 450 maximum |
| Topcoat compatibility | Can be applied over stain after following stain dry time |
| Manufacturer part # | 63010 |
How to apply
Start with the manufacturer's preparation steps: Dry; remove paint, wax, grease, polish and poor old finishes; Sand smooth and remove dust; Stir before and during use; never shake.
- Prepare dry, clean, sanded wood
- Stir and apply thin coat with natural bristle or foam brush
- Let dry 4-6 hours; sand with 220 grit and remove dust
- Apply second coat; repeat for third coat if desired
- Wait 24 hours after final coat for light use
- On floors, use three coats; avoid heavy traffic and furniture for 72 hours, rugs and cleaning for 7 days
Good to know
Use limits: Exterior wood; manufacturer recommends Helmsman Spar Urethane.
Danger: Flammable liquid and vapor; aspiration hazard; may cause allergic skin reaction, reproductive harm and organ damage from repeated exposure.
: Soaked rags may spontaneously catch fire; California warning for cancer and reproductive harm.
Questions
How much will I need?
Use these manufacturer coverage figures: 600-700 sq ft/gallon. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 4-6 hours in PDS application directions; current product page also says 3-4 hours. Follow the application conditions and instructions for this product.