General Finishes Wood Turner's Finish, Clear, 8 oz
Wood Turner's Finish, Clear, 8 oz is intended for Interior only use.
Features
- Slight amber tone
- Gloss finish
- Recoat on lathe in 10 minutes
- More than 50% renewable resources
- Oil-modified water-based urethane
Best for
Raw wood turnings; Wood bowls; Other lathe-turned wood; GF water-based stained wood
Specs
| Color or finish | Clear; dries amber |
|---|---|
| Selected size | 8 oz |
| Base | Hybrid oil/water urethane |
| Use | Interior only |
| Coverage | 38 sq ft per 8 oz bottle |
| Touch dry | 10-30 minutes; under 10 minutes on lathe |
| Recoat | 30+ minutes; 10 minutes on lathe |
| Full cure | 21 days |
| Coats | 3+ |
| Apply with | Synthetic bristle or foam brush; Staining pad or rag; HVLP airbrush; On lathe at 3000 rpm |
| Thinning | Distilled water if desired; GF Extender for open time, 5%-15% by volume |
| Cleanup | Soap and water or GF Brush & Gun Cleaner immediately |
| VOC | <250 g/L |
| Topcoat compatibility | Best as standalone over raw wood or GF water-based stain |
| Manufacturer part # | 8WTF |
How to apply
Start with the manufacturer's preparation steps: Clean surface of dust and contaminants; Let stain dry thoroughly; Sand no finer than 400 grit; Wipe oily exotic wood with acetone.
- Prepare and sand raw wood
- Stir finish
- Apply 3 or more coats by pad, brush or airbrush
- Sand lightly between coats and remove dust
- Allow 21 days to cure
Good to know
Use limits: Existing finishes; Non-wood substrates; Sanding Sealer or shellac underneath; Linseed or Danish oils; Tinting.
Warning: 2021 SDS: causes skin and serious eye irritation; may cause respiratory irritation.
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
How much will I need?
Use these manufacturer coverage figures: 38 sq ft per 8 oz bottle. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 30+ minutes; 10 minutes on lathe. Follow the application conditions and instructions for this product.