General Finishes Oil-Based Pre-Stain Wood Conditioner, Natural, Quart
General Finishes Oil-Based Pre-Stain Wood Conditioner, Natural, Quart is intended for Interior use.
Features
- Reduces blotching and streaking
- Promotes uniform oil-stain absorption
- Amber natural appearance
Best for
New soft and porous wood; Aspen; Cherry; Birch; Poplar; Pine
Specs
| Color or finish | Natural; dries amber |
|---|---|
| Selected size | Quart |
| Base | Oil-based wood conditioner |
| Use | Interior |
| Coverage | 45-50 sq ft/half-pint; 180-200 sq ft/quart |
| Touch dry | 30+ minutes |
| Recoat | Apply oil-based stain after 30 minutes and no later than 2 hours |
| Application conditions | Ideal 70°F and 50% humidity |
| Coats | 1 |
| Apply with | Clean cotton rag; Natural bristle or foam brush; Staining pad; Pad applicator |
| Thinning | Do not thin |
| Cleanup | Mineral spirits or waterless hand cleaner |
| VOC | <686.514 g/L |
| Topcoat compatibility | Use before oil-based stain; can also dilute GF oil-based stain 5%-15% by volume |
| Manufacturer part # | PSQT |
How to apply
Start with the manufacturer's preparation steps: Sand open-grain wood 120, 150, then 180 grit; Sand closed-grain wood no finer than 180 grit; Remove dust.
- Sand raw wood and remove dust
- Stir; do not thin
- Apply one coat and let penetrate at least 10 minutes
- Wipe excess
- Apply oil-based stain after 30 minutes and within 2 hours
Good to know
Use limits: Existing sealed finishes; Water-based stain system; Spray application.
Danger: 2021 SDS: flammable liquid and vapor; aspiration hazard; may cause allergic skin reaction and cancer; causes organ damage from prolonged or repeated exposure; harmful to aquatic life.
: Product page California Prop 65 warning lists ethylbenzene.
Questions
How much will I need?
Use these manufacturer coverage figures: 45-50 sq ft/half-pint; 180-200 sq ft/quart. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is Apply oil-based stain after 30 minutes and no later than 2 hours. Follow the application conditions and instructions for this product.