General Finishes Glaze Effects, Pitch Black, Pint
General Finishes Glaze Effects in Pitch Black, Pint, adds translucent water-based color to decorative interior finishes. Plan about 60–80 sq ft from this pint can, depending on application and surface. Use over a sealed finish such as Milk Paint or a compatible topcoat; test the whole finish system and protect the glaze with clear topcoat.
Features
- Translucent color adds depth to decorative finishes.
- A glaze can accent details without hiding the whole base color.
- An optional clear undercoat improves placement control.
- Brush, pad or roller application allows hand-finished effects.
Best for
Interior sealed furniture, cabinets, trim and doors. Raw wood is not recommended. The manufacturer examples show this glaze over named paints or stains; they are combined-finish references, not promises of the same result on every surface.
Specs
| Color / size | Pitch Black / Pint |
|---|---|
| Base / use | Water-based translucent glaze / interior sealed surfaces |
| Coverage | About 60–80 sq ft per can |
| Touch dry | 30 minutes or longer |
| Recoat / cure | Detailed application guidance: 3 hours or longer, fully dry; water-based finish system cures about 21 days at 70°F and 50% humidity |
| Coats | 1+ glaze coats; avoid 3 or more; finish with 3 compatible GF clear topcoat coats |
| Apply with | Synthetic or foam brush, pad, microfiber roller or spray; current HVLP guidance 1.3–2.0 mm |
| Thinning / cleanup | Distilled water: start at 5%, up to 10% / soap and water or GF Brush & Gun Cleaner |
| VOC | Dated Pitch Black SDS: 303.733 g/L; current page says under that number, so manufacturer reconciliation remains needed |
| Manufacturer part # | PTPB |
How to apply
- Lightly sand a newly sealed finish with a 220–320-grit foam sponge and remove dust. For an existing finish, scuff-clean with a non-woven pad and a 50:50 denatured alcohol/water mix. Dry 1–2 hours, sand lightly with 220–320 grit, remove dust and test adhesion.
- For more placement control, first apply one compatible High Performance clear coat. Stir glaze thoroughly before and during use. Apply a liberal coat with a brush, pad or microfiber roller, then remove excess with an absorbent cloth, good paper towel or dry brush.
- Dry at least three hours between glaze coats and before a water-based topcoat, until dry. Specifications also list a one-hour minimum; this application follows the longer detailed directions. Sand lightly between coats; avoid conventional steel wool and absorbency-poor T-shirts.
- Protect with three compatible GF topcoat coats. Allow 24 hours or longer before an oil-based product. An underlying oil finish needs 72 hours or longer before this water-based glaze. Cool, humid or thick applications need longer drying.
Good to know
WARNING: Suspected of causing cancer. Read the matching-color safety sheet, issued 12/15/2019 and can label; its California notice warns of cancer and birth defects or reproductive harm from listed chemicals. Eye contact can irritate; avoid contact. Ventilate and use its specified protection. Spray application requires the manufacturer’s respiratory and eye protection and equipment checks. Clear Base Glaze Effects can lighten a color; test the mixture. Use Extender only under applicable manufacturer limits. Do not combine water-based finishes with linseed or Danish oils. Treat the finish gently through cure and follow the final topcoat’s cure instructions. Clean tools promptly and dispose under local rules; do not pour leftovers down drains.
Questions
Can I glaze raw wood? Use a sealed surface.
Does the glaze protect the finish? No. A compatible clear topcoat protects the decorative color.
Will a sample match my project? Undercoat, preparation and glaze amount affect the result; test first.