General Finishes Enduro Conversion Varnish, Clear, Satin, Gallon
General Finishes Enduro Conversion Varnish, Clear, Satin, Gallon is intended for Interior/exterior use.
Features
- Post-catalyzed two-component urethane
- High chemical and water resistance
- Clear drying
- Seven-day cure
- Professional spray application
Best for
High-use wood projects; Bars and commercial tabletops; Bathroom vanities; Kitchen cabinets; Areas around dishwashers; High-moisture areas; Raw or stained wood; Primed MDF, HDF and Masonite
Specs
| Color or finish | Clear, Satin |
|---|---|
| Sheen | Satin |
| Selected size | Gallon |
| Base | Water-based two-component urethane/acrylic blend; requires NCO catalyst |
| Use | Interior/exterior |
| Coverage | 450 sq ft/gallon |
| Touch dry | 30+ minutes |
| Recoat | 1+ hour |
| Full cure | 7 days |
| Application conditions | Dry times based on 70°F and 50% humidity |
| Coats | 3; 4 for high-moisture areas |
| Apply with | Spray; HVLP 1.1-1.3 mm |
| Thinning | Distilled water 5%-10% by volume; GF Extender 10%-15% where allowed |
| Cleanup | GF Brush & Gun Cleaner for equipment immediately; soap and water for hands |
| VOC | Satin <210 g/L |
| Topcoat compatibility | Self-sealing; requires up to 10% GF NCO Catalyst by volume; optional first coat GF Sanding Sealer on raw wood |
| Manufacturer part # | CVS |
How to apply
Start with the manufacturer's preparation steps: Raw wood: sand no finer than 220 grit and remove dust; New stain: do not sand; Existing sealed surface: scuff with 50:50 denatured alcohol/water, dry 1-2 hours, sand 220-320 grit, remove dust.
- Prepare wood and test adhesion
- Stir; add up to 10% NCO Catalyst by volume
- Mix 2-5 minutes and rest 15 minutes
- Strain and spray 3 coats or 4 in high-moisture areas
- Sand between coats and allow 7 days cure
Good to know
Use limits: White/light painted surfaces due yellowing; Linseed or Danish oil finishes; Brush application; Toner or tinting.
None: 2025 Satin varnish base SDS: not classified as hazardous.
Danger: Required NCO Catalyst: combustible; harmful if inhaled; causes serious eye damage and skin irritation; may cause skin allergy and respiratory irritation.
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
How much will I need?
Use these manufacturer coverage figures: 450 sq ft/gallon. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 1+ hour. Follow the application conditions and instructions for this product.