General Finishes Enduro 2K White Poly Tint Base, Semi-Gloss, Gallon
General Finishes Enduro 2K White Poly Tint Base, Semi-Gloss, Gallon is intended for Interior/exterior use.
Features
- Two-component urethane
- Tintable white base; 5% short-filled
- High water and chemical resistance
- Exterior rated
- Five-day cure
Best for
Interior and exterior raw wood; Cabinets; Furniture; Woodwork; Pre-primed steel; Fiberglass
Specs
| Color or finish | White tint base, Semi-Gloss |
|---|---|
| Sheen | Semi-Gloss |
| Selected size | Gallon |
| Base | Water-based two-component urethane with required NCO catalyst |
| Use | Interior/exterior |
| Coverage | 450 sq ft/gallon |
| Touch dry | 30+ minutes |
| Recoat | 1+ hour |
| Full cure | 5 days |
| Application conditions | Ideal drying conditions 70°F and 50% relative humidity |
| Coats | 2-3 |
| Apply with | Spray: HVLP; Air-assisted airless; Airless |
| Thinning | After NCO catalyst, distilled water up to 10% by volume if needed |
| Cleanup | GF Brush & Gun Cleaner for equipment immediately; soap and water for hands |
| Topcoat compatibility | Self-sealing; requires NCO Catalyst |
| Manufacturer part # | B791-L |
How to apply
Start with the manufacturer's preparation steps: Sand raw wood no finer than 220 grit and remove dust; Scuff clean sealed surfaces with 50:50 denatured alcohol/water, dry and sand 220-320 grit; Prime sealed surfaces with White Undercoat or interior Stain Blocker.
- Prepare substrate; prime sealed surfaces
- Stir and add required NCO catalyst
- Mix and allow induction time as specified
- Strain and spray 2-3 coats
- Sand between coats and allow five days to cure
Good to know
Use limits: Linseed or Danish oil finishes.
None: Uncatalyzed Semi-Gloss base SDS is not classified as hazardous.
Danger: Required NCO Catalyst: combustible; harmful if inhaled; causes serious eye damage and skin irritation; may cause skin allergy and respiratory irritation.
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
How much will I need?
Use these manufacturer coverage figures: 450 sq ft/gallon. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 1+ hour. Follow the application conditions and instructions for this product.