General Finishes Brushable White Enamel, Semi-Gloss, Quart
General Finishes Brushable White Enamel, Semi-Gloss, Quart is intended for Interior only use.
Features
- White pigmented cabinet topcoat
- Brush or spray application
- Water-based acrylic/urethane
- Self-sealing per manufacturer brochure
Best for
Interior cabinets; Trim; Doors; Furniture; Raw wood; Properly prepared existing finishes
Specs
| Color or finish | White, Semi-Gloss |
|---|---|
| Selected size | Quart |
| Base | Water-based acrylic/urethane blend |
| Use | Interior only |
| Coverage | 450 sq ft/gallon |
| Touch dry | 30 minutes |
| Recoat | 2 hours |
| Full cure | 21 days at 70°F and 50% humidity |
| Application conditions | Recommended 70°F and 50% humidity, out of direct sunlight |
| Apply with | Brush; Roll; Spray |
| Thinning | Water, GF Extender or GF Accelerator |
| Cleanup | Soap and water for hands; GF Brush & Gun Cleaner for equipment |
| VOC | Under 210 g/L per 2020 TDS |
| Topcoat compatibility | Self-sealing per manufacturer brochure; use GF Stain Blocker or White Undercoat as appropriate |
| Manufacturer part # | QESG |
How to apply
Start with the manufacturer's preparation steps: Raw wood: sand no finer than 220 grit; Pre-finished wood: clean with 50:50 denatured alcohol/water, sand 220-320 grit, prime with GF Stain Blocker; Prime potential tannin/color bleed with GF Stain Blocker; otherwise GF White Undercoat.
- Clean and sand surface
- Prime as needed for tannin or color bleed
- Brush, roll or spray
- Sand 220-320 grit between coats
- Allow 21 days to cure
Good to know
Use limits: Exterior use.
Danger: 2021 Semi-Gloss SDS: may damage the unborn child.
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
How much will I need?
Use these manufacturer coverage figures: 450 sq ft/gallon. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 2 hours. Follow the application conditions and instructions for this product.